Know what to ask for. See the evidence behind your selection.
Move your window and door specification forward with clearer requirements, relevant evidence and practical ways to examine the details. APRO brings together documented credentials, project-coordinated calculations, physical mock-ups and specified third-party testing.
Actual test footage. The scene does not establish certification or laboratory ownership.
Your project location, building use, proposed system and specified requirements help define which records and further assessment may be relevant.
— Explore CSA C/US certification, NAFS 2017 testing and NFRC ratings.
— Explore the AS150 specimen’s AS 2047 test evidence.
— Start with your location and product ideas, even if the performance targets are still being developed.
An existing certificate or test report is one part of the picture. Your building’s exposure, design priorities and proposed configuration may call for additional assessment.
APRO can coordinate wind-load calculations according to project needs, helping bring your wind and exposure requirements into the selection discussion.
APRO can coordinate thermal performance calculations according to project needs, supporting discussion of the proposed window and door package and its energy-performance priorities.
The scope and fees for either calculation service are agreed by project. Share your drawings and specified requirements to define the support needed.
Look for the product system, document purpose and covered configuration behind each credential. These records address different questions and work together as a clearer evidence base.
Certificate 80165161 covers selected A80T tilt-and-turn/fixed window assemblies, A140T lift-and-slide doors and A68T folding doors eligible to bear the CSA C/US mark.
CSA C/US · Certificate 80165161 · File 303534
Intertek tested three APRO specimens against the 2017 edition of the North American Fenestration Standard/Specification for windows, doors, and skylights (AAMA/WDMA/CSA 101/I.S.2/A440-17). Each specimen has a U.S. report and a Canadian report.
NFRC Product Certificates of Authorization and accompanying rating reports cover A80T Casement, A80T Hinged Door and APRO Fixed configurations. Explore U-factor, solar heat gain coefficient and visible transmittance for the proposed frame-and-glazing package.
GAO-M-1 · A80T Casement | GAO-M-2 · A80T Hinged Door | GAO-M-3 · APRO Fixed
Explore the Product Num. and glazing layers listed in each NFRC authorization report. Match the complete configuration to your proposed selection.
| Product Num. | 유약 |
|---|---|
| 00001-00001 | 이중창 (2 layers) |
| 00002-00001 | 이중창 (2 layers) |
| 00003-00001 | 이중창 (2 layers) |
| 00004-00001 | 이중창 (2 layers) |
| 00005-00001 | 이중창 (2 layers) |
| 00006-00001 | 이중창 (2 layers) |
| 00007-00001 | 삼중 유리 (3 layers) |
| 00008-00001 | 삼중 유리 (3 layers) |
| 00009-00001 | 삼중 유리 (3 layers) |
| 00010-00001 | 삼중 유리 (3 layers) |
| Product Num. | 유약 |
|---|---|
| 00001-00001 | 이중창 (2 layers) |
| 00002-00001 | 이중창 (2 layers) |
| 00003-00001 | 이중창 (2 layers) |
| 00004-00001 | 이중창 (2 layers) |
| 00005-00001 | 이중창 (2 layers) |
| 00006-00001 | 이중창 (2 layers) |
| 00007-00001 | 삼중 유리 (3 layers) |
| 00008-00001 | 삼중 유리 (3 layers) |
| 00009-00001 | 삼중 유리 (3 layers) |
| 00010-00001 | 삼중 유리 (3 layers) |
| Product Num. | 유약 |
|---|---|
| 00001-00001 | 삼중 유리 (3 layers) |
| 00002-00001 | 이중창 (2 layers) |
| 00003-00001 | 삼중 유리 (3 layers) |
| 00004-00001 | 삼중 유리 (3 layers) |
| 00005-00001 | 이중창 (2 layers) |
| 00006-00001 | 삼중 유리 (3 layers) |
| 00007-00001 | 이중창 (2 layers) |
| 00008-00001 | 삼중 유리 (3 layers) |
| 00009-00001 | 이중창 (2 layers) |
| 00010-00001 | 삼중 유리 (3 layers) |
| 00011-00001 | 삼중 유리 (3 layers) |
| 00012-00001 | 이중창 (2 layers) |
| 00013-00001 | 삼중 유리 (3 layers) |
| 00014-00001 | 삼중 유리 (3 layers) |
| 00015-00001 | 이중창 (2 layers) |
| 00016-00001 | 삼중 유리 (3 layers) |
| 00017-00001 | 이중창 (2 layers) |
| 00018-00001 | 삼중 유리 (3 layers) |
| 00019-00001 | 이중창 (2 layers) |
| 00020-00001 | 삼중 유리 (3 layers) |
The AS150 awning-window report documents structural, operating-force, air-infiltration and water-penetration testing. It describes a tested specimen and its results, rather than an AS 2047 certification licence.
AS150 Series · Report 201228037GZU-001
AS150 awning-over-fixed window · AS 2047 test record 201228037GZU-001.
Coverage and ratings depend on the specified product, dimensions and configuration. Ask for the records that cover your proposed system and configuration.
Consider air, water and structural test records alongside the exposure and requirements of your building. The tested specimen and conditions give the results their context.
Use relevant thermal ratings and project-coordinated calculations to inform your selection discussion. Consider the proposed frame and glazing together.
Explore acoustic test evidence for selected window and door configurations. The tested system, glazing and dimensions matter when considering its relevance to your project.
CQM certificate 00226Q01144R101 covers APRO’s sales and DMLP Facade & Engineering’s production of aluminum-alloy doors, windows and curtain walls within one quality management system.
The related IQNET certificate recognizes the same system and is linked to the CQM certificate and its annex. Quality-management certification addresses organizational processes; it does not replace product certification or performance evidence.
CQM 00226Q01144R101 · IQNET CN-00226Q01144R101
One quality management system. Linked certification and recognition records.
Turn drawing details into something your team can examine. APRO can provide physical window and door mock-ups and installation or junction samples to agreed project requirements.
See appearance and finish against your design intent. Try opening movement where included in the sample. Examine an agreed installation or junction detail. Mock-up scope and fees are agreed by project.
Where your configuration or specification calls for further verification, APRO can coordinate additional third-party testing. Scope, fees and timing are agreed by project. A mock-up and additional testing can be discussed separately according to what your team needs.
Product certification identifies covered systems and configurations. A rating describes specified performance characteristics. A test report records a specimen’s results under stated conditions. Check each document against your proposed selection.
Share the required standard and edition. The available records document NAFS 2017 testing and, for Canadian records, CSA A440S1-19. Their applicability to another edition or project requirement needs separate consideration.
Yes. APRO can coordinate both according to project needs. Scope and fees are agreed by project.
No. The CQM and related IQNET documents address one quality management system. Product certification, ratings and test reports provide different evidence for selected products.
Bring the proposed configuration and requirements into the discussion. Project-coordinated calculations, a specified physical sample or additional third-party testing may help define the next step, with the relevant scope and commercial terms agreed by project.
Share your project location and building use, proposed system, dimensions and glazing, and any specified requirements or drawings. For a sample, tell us what your team wants to examine.
